Description
The Acrylic Badge with Embedded Magnet – 50 mm is cut from 3 mm acrylic to any shape you send, with strong magnets set into the back. It is the badge to choose when a round button badge is not the look you want — a logo silhouette, a letter, a mascot outline, anything that can be cut.
Because the magnets are embedded rather than glued to a pin plate, there is nothing to push through the fabric, which makes it suitable for uniforms, suits and anything else that should not be pierced.
Size and material of the Acrylic Badge with Embedded Magnet – 50 mm
The badge can be cut into any shape within a maximum size of 50 mm by 50 mm. The acrylic is 3 mm thick and there are strong magnets at the back. The minimum order is 50 badges of the same design. A larger version is made up to 95 by 65 mm if the shape needs more room.
Nothing changes from order to order except the shape and the artwork: the Acrylic Badge with Embedded Magnet – 50 mm is always 3 mm acrylic with magnets set into the back. Send the same cut file again and the badges match the ones you had before.
Artwork
Send your artwork as a PDF, in CMYK and vector wherever possible, so that lines and small text stay sharp at this size. We print the file you send rather than designing it here, so have the artwork ready before you place the order. Keep the important part of the design well inside the edge rather than right at the border.
Ordering and delivery
Choose your quantity above, upload your PDF and place the order. Time delay is 4-5 working days plus courier delay. Prices shown on this page include GST. If a printed round badge suits the job better, see the Button Badge with Magnet – 44 mm Diameter (Round) or the 58 mm, and the full range sits in Event & Promotional Badges. Recent work is posted on our Instagram page.
